Eucalyptus Tree

[Jewl]

Looking to repurpose my eucalyptus tree
Aprox 60 feet high
And 58 inches around
Tree is in Las Vegas

 

[lgf3rr]

You got a pretty small diameter for a 60-ft tree! Eucalyptus is also tricky since it's prone to cracking as it dries. You'll want to seal the ends of the logs with anchorseal or a similar wax right after you cut them to slow the drying. If you're milling it, be patient and let it air-dry properly before using it. You might get some nice turning blanks out of it, or even just use it for fence posts.

 

[RootyRuth]

Looking to repurpose my eucalyptus tree
Aprox 60 feet high
And 58 inches around
Tree is in Las Vegas

I second @lgf3rr's advice about drying. That cracking is a big issue with eucalyptus. I'd get that Anchorseal on ends as soon as you cut it! For a tree this size, you'll probably get some awesome material for smaller projects, maybe some live-edge shelving or a few benches. I think the turning blanks alone would be worth it. That grain can be incredible, so it's definitely worth the effort to save as much as you can.

 

[gold dragon]

You can use it as end grain side or coffee table. Cut the log into thick, short sections like 18-24 inches tall, sand the top and bottom smooth, apply a protective finish (like epoxy or polyurethane), and you have a beautiful, rustic side table or pedestal. You can also turn it into a live-edge slab table. Given the large diameter, you could get a stunning, wide live-edge slab that keeps the tree's natural shape. Ideal for a one-of-a-kind dining table, kitchen island top, or coffee table.

 

[fellah101]

Depending on the condition and straightness of the trunk, you could mill it into slabs or beams for furniture or outdoor projects. Eucalyptus can make beautiful tabletops if dried properly, though it’s prone to splitting if you rush it